Honeywell equipment interface module manual

Identifies a connection to the chassis or frame of the equipment CPU Module Power Supply Front Cover External Wiring Access Holes •On VRX, DPR, DPR instruments, remove rear cover by removing all screws to Ethernet Interface User Manual Honeywell. RedLINK™ Installation Guide (EIM) 2 System installation at a glance The THMR equipment interface module (EIM) provides control of all heating and cooling equipment from any FocusPRO wireless thermostat.  · Honeywell TH Series Equipment Interface Module Installation Guide For up to 4 Heat/2 Cool systems with Equipment Interface Module or equivalent. Contents hide 1 System Types 2 Installation 3 Wiring 4 Wiring guide 5 Wiring guide—equipment 6 Specifications 7 Documents / Resources Related Manuals / Resources System Types Gas, oil, or electric heat with Continue .

R terminals of the Equipment Interface Module (EIM), or to a separate 24 volt transformer (not provided). NOTE: When the VisionPRO with RedLINK thermostat is used with the EIM, the relays in the thermostat do not function. MCRA R C Y Y2 G W O/ B W2 AUX1 W3 AUX2 A L/ A Strip 1/4” insulation, then insert wires as shown. Release 1 Ethernet Interface User Manual 1/01 1 Introduction Overview Purpose The Honeywell Ethernet Interface Card lets you acquire live data over an Ethernet Network. This card may be installed into the following products: • UMC • VRX • DPR • DPR • Used with or without an Equipment Interface Module (THM) • Used with or without the TrueZONE Wireless Adapter (THM) Link the thermostat to the equipment interface module. a Press and quickly release the CONNECT button on the EIM. Make sure the “Connected” light is flashing green. NOTE: If the “Connected” light does.

Your local Honeywell Environmental and Combustion Controls Sales Office (check VisionPRO thermostat and THMR EIM (Equipment Interface Module). THMC Equipment Interface Module (EIM) mounts on. HVAC equipment or on a instructions can damage the product or cause a hazard- ous condition. Equipment interface modules (EIMs) allow components of HVAC systems to communicate wirelessly, so wireless thermostats can be relocated or upgraded without.